KB Performance, 1340 Shovel forged piston kit. +.010"

Forged piston set. 9.0:1 CR with 112cc head. Piston weight 416gr. Piston pin weight 97gr. Piston pin dia. .791" / offset. Head type: Dome with -52.7cc. Compression height 1.285". Bore 3.498". Stroke 4.250". Rod length 7.440". Cyl. length 5.330". All KB forged pistons are made from 4032 alloy; a 11% silicon alloy that is formed in a forging press. Forging aluminum gives a superior strength and structural integrity on a molecular level; after which it is fully machined. The combination of this alloy and the forging process allows the piston to flex under detonation; or pre-ignition; giving the best resistance to cracking. Although 4032 has a low expansion rate; it is higher than the cast Hypereutectic. Therefore forged KB pistons will require about .001" wider piston to wall clearance. Pistons are sold as sets; complete with wrist pin retaining rings; wrist pins and piston rings. Note: All KB forged pistons come equipped with offset wrist pins / piston pins. There is a front and rear section on the piston and it is necessary to install it in the correct way. Please refer to the installation instructions; as provided with the piston set; prior to installation.